ONE-LOCK CARVE 200 STABILIZER

SNAP / HOLD / SPEED

With a preset angle of -1.5°, it’s perfectly tuned for minimal drag. Combined with its large upturned wingtips, the Carve 200 locks in at high speeds without increasing lift. When carving, this stabilizer is highly responsive in roll and pitch, making high-speed turns its specialty. Much like larger fins on a surfboard, the wingtips of the Carve 200 hold firm when pushed into a turn, ensuring no tail slip.

Who is it for?

The 200 Tail is designed for riders looking to boost their stabilizer’s performance by reducing lift and enhancing tail lock. While it may not suit every rider, this stabilizer improves upwind angle and unlocks pitch in a way that introduces a new level of powered riding.

Package Includes: One-Lock Carve Tail 200, Protective Cover

Features

One-Lock™ Latch

The stabilizer comes with a preinstalled One-Lock™ latch to secure the front and rear wings inside the mast’s bottom collar. Each stabilizer includes an additional replacement One-Lock™ latch.

Fillets

Our wings incorporate fillets to increase overall strength. These fillets also help minimize drag, resulting in more efficient performance.

Carve 200 Construction

The Carve 200 Tail is constructed with a blend of high and mid-modulus carbon, creating a stiff, high-performance stabilizer. The carbon layers are strategically positioned at 0° along the span to maximize stiffness and at 45° to prevent stabilizer twist.

Upturned Wingtips

The Carve 200 Tail features a flat center section that transitions to aggressive upturned wingtips. This design enhances yaw lockout, providing more control during upwind powered riding. It also ensures pitch stability, allowing the rider to maintain precise control over their height in the water and making jumps easier.

THIS IS ONE-LOCK™

REVOLUTIONARY TECHNOLOGY / FASTER THAN EVER

The future of hydrofoiling

One-Lock™ is a revolutionary technology that will transform the hydrofoil market. Drawing on Slingshot's experience bringing foils to the mass market with Hover Glide, they started from scratch to revolutionize how hydrofoils are used.

Until now, all hydrofoils were held together with screws. The new screwless system, One-Lock™, eliminates 100% of the drag caused by screws.

With the screwless design, it is possible to assemble or disassemble your foil in less than 10 seconds while enjoying the smoothest riding experience ever felt on a foil.

Discover One-Lock™

Do you have 10 seconds to spare? You’ve never seen a foil assembled like this. Slingshot’s design and testing team spent three years developing the most optimized system they could imagine, reducing it to just three components: the stabilizer, the front wing, and the mast.

This simplified design eliminates the need for tools, prevents corrosion and screw loss, avoids stripped heads, and saves time.

On the water, these solutions offer even more advantages: reduced drag, weight reduction, and more precise foil positioning, all thanks to the absence of screws.

At Slingshot, the mission is to innovate. Innovation is not just about launching something new. Innovation means solving a customer problem. With One-Lock™, more than one problem has been solved.