Ningún producto
login
One-Lock Glide Front Wing Foil Slingshot
799,00 €
View larger
Reserve it now and receive it in Spring 2025. Don't miss out!
LIFT / GLIDE / CARVE
THE DESIGN DIFFERENCE
Through utilizing a medium-high aspect ratio, we found the most forgiving and playful front wing shape yet. The medium high camber profile excels in low-end lift, allowing smaller wings to get up at slower speeds. When accelerating to faster speeds, the wing tip twist prevents the foil from gaining lift. This means there is no increase in front foot pressure when pushing the foil to the extremes.
WHO IT’S FOR
The Glide line of front wings is designed for riders seeking the best all-around wing for their second foil purchase. With a balance of lift, maneuverability, and consistent foot pressure, this wing allows riders to quickly adapt and gain confidence. The trust built in the foil’s feel accelerates progression, enabling riders to ride faster and with greater control.
MEDIUM-HIGH CAMBER PROFILE
A Medium-High Camber Profile was used on this front wing to boost low-end lift in a compact surface area. This design allows the rider to use a smaller wing, resulting in a more nimble and agile foil that’s still easy to control across a wide range of wind conditions.
SLINGSHOT STIFF CONSTRUCTION
The Glide front wing series is constructed with a blend of high and mid modulus carbon, creating a stiff, high-performance wing. The carbon layers are strategically positioned at 0° along the span to maximize stiffness and at 45° to prevent wing twist. Additionally, an internal stringer has been incorporated to further enhance the wing’s stiffness.
One-Lock™ Latch
Our front wings come with a preinstalled One-Lock™ latch to secure the front and rear wings inside the collar on the bottom of the mast. Each wing includes an additional replacement OneLock™ latch.
Fillets
Our wings incorporate fillets to increase their overall strength. These fillets also help minimize drag, resulting in a more efficient performance.
Monobloc Front Wing
The front part of our fuselage section is now molded into the front wing using a Carbon Arc Layup, reducing drag and creating a stronger connection for increased responsiveness. The construction of the fuselage section is consistent across the One-Lock line, further ensuring reliable control and performance while enhancing the direct feedback from the front wing.
Hand Finished
All of our front wings are hand-finished to precisely tune the flow of water off the trailing edge and tips. This meticulous process results in a more efficient foil and a smoother ride on the water.
Package Includes: One-Lock Glide Front Wing, Protective Cover, Replacement One-lock Latch kit
| Surface Area (cm²) | Span (mm) | Aspect Ratio | Weight (kg) |
|---|---|---|---|
| 725 | 799 | 8.9 | 1.04 |
| 925 | 899 | 8.8 | 1.14 |
| 1125 | 999 | 8.9 | 1.24 |
| 1325 | 1099 | 8.9 | 1.34 |
THIS IS ONE-LOCK™
REVOLUTIONARY TECHNOLOGY / FASTER THAN IMAGINABLE
The future of hydrofoiling
One-Lock™ is a groundbreaking technology that will revolutionize the hydrofoil market. Drawing from our experience bringing foils to the general market with Hover Glide, we started from scratch to revolutionize how hydrofoils are used.
Until now, all hydrofoils have been held together with screws. Our new screw-free system, One-Lock™, eliminates 100% of the drag caused by screws.
With the screw-free design, you can set up or take down your foil in 10 seconds or less, while also experiencing the smoothest ride ever felt on a foil.
Discover One-Lock™
Got 10 seconds to spare? You’ve never seen a foil assembled like this. Our team of designers and testers spent three years developing the most optimized system they could imagine, distilling it down to just three components: the stabilizer, the front wing, and the mast.
This streamlined design eliminates the need for tools, prevents corrosion and lost screws, avoids stripped heads, and saves time.
On the water, these solutions offer even more advantages: reduced drag, weight savings, and more precise foil positioning, all thanks to the absence of screws.
At Slingshot, its mission is to innovate. Innovation is not just about launching something new. Innovation is about solving a problem for the customer. With One-Lock™, we have solved more than one problem.
More info
One-Lock Glide Front Wing Foil Slingshot
Reserve it now and receive it in Spring 2025. Don't miss out!
LIFT / GLIDE / CARVE
THE DESIGN DIFFERENCE
Through utilizing a medium-high aspect ratio, we found the most forgiving and playful front wing shape yet. The medium high camber profile excels in low-end lift, allowing smaller wings to get up at slower speeds. When accelerating to faster speeds, the wing tip twist prevents the foil from gaining lift. This means there is no increase in front foot pressure when pushing the foil to the extremes.
WHO IT’S FOR
The Glide line of front wings is designed for riders seeking the best all-around wing for their second foil purchase. With a balance of lift, maneuverability, and consistent foot pressure, this wing allows riders to quickly adapt and gain confidence. The trust built in the foil’s feel accelerates progression, enabling riders to ride faster and with greater control.
MEDIUM-HIGH CAMBER PROFILE
A Medium-High Camber Profile was used on this front wing to boost low-end lift in a compact surface area. This design allows the rider to use a smaller wing, resulting in a more nimble and agile foil that’s still easy to control across a wide range of wind conditions.
SLINGSHOT STIFF CONSTRUCTION
The Glide front wing series is constructed with a blend of high and mid modulus carbon, creating a stiff, high-performance wing. The carbon layers are strategically positioned at 0° along the span to maximize stiffness and at 45° to prevent wing twist. Additionally, an internal stringer has been incorporated to further enhance the wing’s stiffness.
One-Lock™ Latch
Our front wings come with a preinstalled One-Lock™ latch to secure the front and rear wings inside the collar on the bottom of the mast. Each wing includes an additional replacement OneLock™ latch.
Fillets
Our wings incorporate fillets to increase their overall strength. These fillets also help minimize drag, resulting in a more efficient performance.
Monobloc Front Wing
The front part of our fuselage section is now molded into the front wing using a Carbon Arc Layup, reducing drag and creating a stronger connection for increased responsiveness. The construction of the fuselage section is consistent across the One-Lock line, further ensuring reliable control and performance while enhancing the direct feedback from the front wing.
Hand Finished
All of our front wings are hand-finished to precisely tune the flow of water off the trailing edge and tips. This meticulous process results in a more efficient foil and a smoother ride on the water.
Package Includes: One-Lock Glide Front Wing, Protective Cover, Replacement One-lock Latch kit
| Surface Area (cm²) | Span (mm) | Aspect Ratio | Weight (kg) |
|---|---|---|---|
| 725 | 799 | 8.9 | 1.04 |
| 925 | 899 | 8.8 | 1.14 |
| 1125 | 999 | 8.9 | 1.24 |
| 1325 | 1099 | 8.9 | 1.34 |
THIS IS ONE-LOCK™
REVOLUTIONARY TECHNOLOGY / FASTER THAN IMAGINABLE
The future of hydrofoiling
One-Lock™ is a groundbreaking technology that will revolutionize the hydrofoil market. Drawing from our experience bringing foils to the general market with Hover Glide, we started from scratch to revolutionize how hydrofoils are used.
Until now, all hydrofoils have been held together with screws. Our new screw-free system, One-Lock™, eliminates 100% of the drag caused by screws.
With the screw-free design, you can set up or take down your foil in 10 seconds or less, while also experiencing the smoothest ride ever felt on a foil.
Discover One-Lock™
Got 10 seconds to spare? You’ve never seen a foil assembled like this. Our team of designers and testers spent three years developing the most optimized system they could imagine, distilling it down to just three components: the stabilizer, the front wing, and the mast.
This streamlined design eliminates the need for tools, prevents corrosion and lost screws, avoids stripped heads, and saves time.
On the water, these solutions offer even more advantages: reduced drag, weight savings, and more precise foil positioning, all thanks to the absence of screws.
At Slingshot, its mission is to innovate. Innovation is not just about launching something new. Innovation is about solving a problem for the customer. With One-Lock™, we have solved more than one problem.
Buy One-Lock Glide Front Wing Foil Slingshot
SÉ EL PRIMERO EN EVALUAR ESTE PRODUCTO
Haz clic aquí para dar tu opinión
Shipping
Ships in 24/48 hours and FREE from 50 € to Peninsula.
Payment methods
Pay buy Paypal or credit card. Up to 12 months of financing.
Special offers
Enjoy buying online with our special offers and discounts.
Síganos